All Categories
US$

Cart

Loadding...
Home>Remote Key>For Benz>NO token Xhorse VVDIYellow Color
NO token Xhorse VVDIYellow Color

NO token Xhorse VVDIYellow Color

US$ 6.65 US$ 7.00
button
3 button 4 button
shell or pcb
Stock ( 39916 )

Copy and share this link on social network or send it to your friends

Copy
Adding to cart succeed
NO token Xhorse VVDIYellow Color
color:red,size:xxl
Subtotal: US$ 0
View My Cart
    • Product Name: NO token Xhorse VVDIYellow Color
    • Item NO.: For Benz-R10A7
    • Weight: 0.05 kg = 0.1102 lb = 1.7637 oz
    • Volume: 50 CBM
    • Category: Remote Key > For Benz
    • Creation Time: 2022-07-22
    • For Xhorse VVDI 3/3+1 button for benz remote Key Yellow Color No token Points

    For Xhorse VVDI 3/3+1 button for benz remote  Key Yellow Color No token



    1.Applicable List:705 Moto(1997-2000) NEC(2001-2005) NEC(2006-2010) BGA(after 2011)

    2. Programmed by :All kinds of MB key programmer such as Digimaster-III ,CKM100, VVDI MB TOOL, AK500 , MBE MB-KEY OBD2, NEC-57 MB-PRO,Etc.

    3. Frequency:315MHZ/433MHZ




    For Xhorse VVDI BE Key Pro Features:

    More compatibility
    New design
    High Stability
    High reliability
    Digital Signature

    VVDI BE keyPro improvements:

    1. Fix the bug that W164/W639 EIS data doesn't synchronize the key.
    2. Fix the bug/fault that the BE key stop work after repeatedly turn ON the ignition without remove key out from EIS/EZS for example with work on diagnostic...switch IGN OFF---ON for erase faults...then car not start
    3. Fix the bug/fault of trunk remote open on cars where power lifts on trunk door mainly...
    4. Fix the bug that the BE key only sent RF signal for one time, after update, the RF signal can be sent for two times when press and release the key.
    5. Modify the rolling algorithm, fix some errors of BE key.
    6. Add pre-roll algorithm: the HASH value can roll ahead.
    7. Adopt car-grade quartz crystal, improve infrared communication stability.
    8. Boost the infrared signal when you press the button.


    The way to reset the frequency with the PCB SMD resistor:

    Weld the 1K SMD resistor on the position the arrow points and the frequency is 315MHZ, after remove it will be 433.92MHZ.